Deal: $174.97 (SAVE Now!)
as of 09/30/2020 (Details)
Scrypt (Litecoin) Mining Hash Rate: 504MH/s (±7% is expected). Power Consumption: 800W (±10%) at the wall (with Bitmain's APW3 PSU, 93 percent efficiency, 25C ambient temp). Power Efficiency: 1.6 J/MH at the wall (with Bitmain's APW3 PSU). Noise level: Loud. Not for desk-top use. Sounds like a vacuum. Chip quantity per unit: 288 x BM1485. Rated Voltage: 11.60 ~13.00V. Operating Temperature: 0C to 40C. Network Connection: Ethernet (cable not included). Notes: 1. Due to the nature of these products, there are higher than normal restocking fees (typically 30-40%). The restocking fees are typically waived in the event that there is a provable failure within the first 30 days. In the event that you experience a failure, please reach out to the seller immediately so that we can begin troubleshooting with you and/or processing a return.2. Each AntMiner L3+ requires nine 6-pin PCI-e connectors for 12V DC input (must be very stable power source) There are four hash boards that require two 6-pin PCI-e connectors each and one additional 6-pin PCI-e connector on the controller. All NINE 6-pin PCI-e connectors are required. Do not connect more than one PSU to the same hash board to prevent possible damage and instability. 3. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter. 4. Power supply unit is not included. Bitmain recommends the APW3 or the APW5 power supply for the AntMiner L3+.
Do you want ot get the AntMiner L3+ ~504MH/s @ 1.6W/MH ASIC Litecoin Miner (504MH)?